• The Onecrete standard panel is an exterior load bearing, structural AAC panel of 100mm and/or 125mm 600mm wide and up to 6 meters long. The panel can be manufactured in any length the client wishes between1 and 6 meters long or cut on site to suit.

The Onecrete panel is specially reinforced and installed in a patented system to ensure its load bearing capacity.

Services can be easily installed against the internal wall prior to insulation and battening proceeds by Onecrete thus removing the need for chasing in of services.

• The Onecrete Cyclone panel is a strongly reinforced panel that allows the panel to be bolted onto the concrete slab (bottom) and the roofing structure (top). This system effective locks the whole building together giving it substantial strength and integrity against strong winds. The panel has been tested by Griffith University, Queensland, and is wind rated at W65 or greater.

(Click to enlarge)

• The Onecrete Interior wall panel is not load bearing, but retains all of the thermal, acoustic and other advantages of the Onecrete product. It is especially effective in light commercial construction where heating or cooling can be a large part of the ongoing running costs of the building.